Jeremy Gilbert to Hip Prosthesis
This is a "connection" page, showing publications Jeremy Gilbert has written about Hip Prosthesis.
Connection Strength
9.699
-
Long-term fretting corrosion performance of modular head-neck junctions with self-reinforced composite gaskets from PEEK and UHMWPE. J Mech Behav Biomed Mater. 2022 05; 129:105149.
Score: 0.741
-
CORR Insights?: Are Damage Modes Related to Microstructure and Material Loss in Severely Damaged CoCrMo Femoral Heads? Clin Orthop Relat Res. 2021 09 01; 479(9):2097-2099.
Score: 0.715
-
Interfacial compliance, energy dissipation, frequency effects, and long-term fretting corrosion performance of Ti-6Al-4V/CoCrMo interfaces. J Biomed Mater Res A. 2022 02; 110(2):409-423.
Score: 0.713
-
Nontribological corrosion modes dominate wrought CoCrMo acetabular taper corrosion: A retrieval study. J Biomed Mater Res B Appl Biomater. 2021 12; 109(12):2000-2013.
Score: 0.699
-
Self-reinforced poly(ether ether ketone) and polyethylene composite gaskets for prevention of mechanically-assisted corrosion in modular taper junctions: Seating, micromotion and short-term fretting corrosion. J Mech Behav Biomed Mater. 2021 07; 119:104454.
Score: 0.694
-
In vitro fretting crevice corrosion damage of CoCrMo alloys in phosphate buffered saline: Debris generation, chemistry and distribution. Acta Biomater. 2020 09 15; 114:449-459.
Score: 0.664
-
Fretting corrosion of Si3 N4 vs CoCrMo femoral heads on Ti-6Al-V trunnions. J Orthop Res. 2020 07; 38(7):1617-1626.
Score: 0.650
-
In vitro test methods for seating and fretting corrosion behavior of modular metal-on-metal acetabular tapers. J Orthop Res. 2020 05; 38(5):1089-1100.
Score: 0.636
-
Design, Material, and Seating Load Effects on In?Vitro Fretting Corrosion Performance of Modular Head-Neck Tapers. J Arthroplasty. 2019 05; 34(5):991-1002.
Score: 0.597
-
Effects of Seating Load Magnitude on Incremental Cyclic Fretting Corrosion in 5?40' Mixed Alloy Modular Taper Junctions. J Arthroplasty. 2018 06; 33(6):1953-1961.
Score: 0.558
-
Primary hip replacement stem taper fracture due to corrosion in 3 patients. Acta Orthop. 2016; 87(2):189-92.
Score: 0.484
-
In vivo oxide-induced stress corrosion cracking of Ti-6Al-4V in a neck-stem modular taper: Emergent behavior in a new mechanism of in vivo corrosion. J Biomed Mater Res B Appl Biomater. 2012 Feb; 100(2):584-94.
Score: 0.363
-
Fretting crevice corrosion of stainless steel stem-CoCr femoral head connections: comparisons of materials, initial moisture, and offset length. J Biomed Mater Res B Appl Biomater. 2009 Jan; 88(1):162-73.
Score: 0.297
-
In vivo severe corrosion and hydrogen embrittlement of retrieved modular body titanium alloy hip-implants. J Biomed Mater Res B Appl Biomater. 2009 Jan; 88(1):206-19.
Score: 0.297
-
In vitro corrosion testing of modular hip tapers. J Biomed Mater Res B Appl Biomater. 2003 Feb 15; 64(2):78-93.
Score: 0.198
-
The effect of hypochlorous acid on the tribocorrosion of CoCrMo/Ti-6Al-4V bearing couples. J Biomed Mater Res A. 2021 12; 109(12):2536-2544.
Score: 0.177
-
Effect of the support systems' compliance on total hip modular taper seating stability. Proc Inst Mech Eng H. 2018 Sep; 232(9):862-870.
Score: 0.145
-
Fracture of an acetabular component inserted without cement. A case report. J Bone Joint Surg Am. 1997 Jun; 79(6):901-5.
Score: 0.133
-
Ceramic Heads Decrease Metal Release Caused by Head-taper Fretting and Corrosion. Clin Orthop Relat Res. 2016 Apr; 474(4):985-94.
Score: 0.122
-
Modern trunnions are more flexible: a mechanical analysis of THA taper designs. Clin Orthop Relat Res. 2014 Dec; 472(12):3963-70.
Score: 0.111
-
Intergranular corrosion-fatigue failure of cobalt-alloy femoral stems. A failure analysis of two implants. J Bone Joint Surg Am. 1994 Jan; 76(1):110-5.
Score: 0.105
-
In vivo corrosion of modular hip prosthesis components in mixed and similar metal combinations. The effect of crevice, stress, motion, and alloy coupling. J Biomed Mater Res. 1993 Dec; 27(12):1533-44.
Score: 0.105
-
Is increased modularity associated with increased fretting and corrosion damage in metal-on-metal total hip arthroplasty devices?: a retrieval study. J Arthroplasty. 2013 Sep; 28(8 Suppl):2-6.
Score: 0.102
-
Do ceramic femoral heads reduce taper fretting corrosion in hip arthroplasty? A retrieval study. Clin Orthop Relat Res. 2013 Oct; 471(10):3270-82.
Score: 0.101
-
A computer-based biomechanical analysis of the three-dimensional motion of cementless hip prostheses. J Biomech. 1992 Apr; 25(4):329-40.
Score: 0.093
-
A multicenter retrieval study of the taper interfaces of modular hip prostheses. Clin Orthop Relat Res. 2002 Aug; (401):149-61.
Score: 0.048
-
Bending and fracture toughness of woven self-reinforced composite poly(methyl methacrylate). J Biomed Mater Res. 1997 Sep 15; 36(4):441-53.
Score: 0.034
-
Does Taper Size Have an Effect on Taper Damage in Retrieved Metal-on-Polyethylene Total Hip Devices? J Arthroplasty. 2016 09; 31(9 Suppl):277-81.
Score: 0.031
-
Local and distant products from modularity. Clin Orthop Relat Res. 1995 Oct; (319):94-105.
Score: 0.030
-
Migration of corrosion products from modular hip prostheses. Particle microanalysis and histopathological findings. J Bone Joint Surg Am. 1994 Sep; 76(9):1345-59.
Score: 0.028
-
Composition and morphology of wear debris in failed uncemented total hip replacement. J Bone Joint Surg Br. 1994 Jan; 76(1):60-7.
Score: 0.026